海外石油工程施工現場常用工具的表達

發布時間:2019-03-17 06:13

常用工具

COMMON TOOLS

1、Get me a hammer(hacksaw, file, scraper, chisel, socket, wrench, hook spanner, adjustable wrench, pipe wrench, ratchet wrench, open end wrench, screw driver, hand vice,pliers, pocket knife).

給我拿一把手錘(鋼鋸、銼刀、刮刀、鑿子、套筒扳手、鉤扳手、活動扳手、管扳手、棘輪扳手、開口扳手、螺絲刀、手鉗、扁嘴鉗、小刀)。

2、Straightedge rule(square rule, slide gauge, inside and outside micrometer, steel tape, feeler,dial gauge, depth micrometer, wire gage, radius gage, thread pitch gage) is a kind of common measuring tool.

直尺(角尺、遊標卡尺、內徑和外徑千分尺、鋼卷尺、塞尺、千分表、深度千分尺、線規、半徑規、螺距規)是一種常用量具。

3、The precision of this fitter level (cross-test level) is 0.02mm/M.

這個鉗工水平儀(框架式水平儀)的精度為0.02毫米/米。

4、We have got the instrument (pressure gauge, thermometer, tachometer, current meter, universalmeter) ready for the experiment (test).

榴莲视频app下载官网入口已經準備好做實驗(試驗)的儀器(壓力表、溫度計、轉速計、電流表、萬用表)。

5、That is an air(electric) powered grinder (portable grinder, angle grinder, straight grinder,drill, impact wrench, riveting hammer, hammer drill).

那是一個氣(電)動砂輪機(手持砂輪機、角型砂輪、直型砂輪、鑽機、衝擊扳手、鉚釘錘、錘鑽機)。

6、Our electrical tools are double insulated and approved to international safety standards.

榴莲视频app下载官网的電動工具都是雙重絕緣的,並符合國際安全標準。

7、Hydraulic pump is the power unit of the hydraulic puller (hydraulic press, hydraulic pipe bender,hydraulic jack).

油壓泵是油壓拉出器(油壓機、油壓彎管機、油壓千斤頂)的動力裝置。

8、A welder’s kitcontains electrode holder, welding torch, helmet shield, portable electrodeheating box and temperature measuring pen.

一名焊工的成套工具包括焊鉗、焊炬、麵罩、手提式焊條加熱箱和測溫筆。

9、The diameter of this wire rope (hemp rope, sling) is three-fourth inches (3/4”).

這鋼絲繩(麻繩、吊索)的直徑為3/4英寸。

10、The lifting capacity of this chain hoist (hydraulic jack, screw jack) is 5 tons.

這個吊鏈(油壓千斤頂、螺旋千斤頂)的起重能力為5噸。

11、The vise(parallel-jaw vice) is available to all of the bench work.

所有的鉗工工作都可使用台鉗(平口鉗)。

12、Grease gun and oiler are the lubrication service tools for machinery.

油槍和注油器都是機械潤滑維護工具。

13、Torque wrenches offer the precision measurement needed to tighten fasteners.

力矩扳手可以提供禁錮螺栓所需的精確力矩計量。

14、The measuring unit of torque wrench is pound-inch or kilogram-centimeter.

力矩扳手的計量單位為鎊-寸或者公斤-厘米。

15、Is the machine accompanied with some tools (spare parts, accessories)?

這台機器隨機帶有一些工具(備件、附件)嗎?

16、Could you tell us how to use (operate, repair, maintain, clean, adjust) this new tool?

你能告訴榴莲视频app下载安装安如何使用(操作、修理、維護、清理、調整)這個新工具嗎?

17、The tool gets out of order and we must remedy its trouble.

這工具有毛病,榴莲视频app下载官网入口必須排除它的故障。

18、The tool is out of repair and it needs an overhaul.

這工具失修,需要拆修。

19、From your explanation I shall easily handle it.

聽了你的說明,我將易於操縱它。

20、The tools must be well kept.

工具必須妥善保管。